Levels of readiness for development

The transmit receive module is to be used in antenna phased arrays; enables to develop both 1D and 2D arrays

The system is to be used for monitoring the performance of scholarly researchers of various R&D institutions. It provides automated data collection, processing, and delivery upon request for scoring the researcher’s rating and compliance with position occupied, as well as informational support for decision-making Home page of automated system

The device is designed to measure the content of radionuclides accumulated in the human body as a result of consumption of contaminated food or inhalation of contaminated air

Used in metallurgy, for producing iron in blast furnaces

The detector is used to control the whole milk quality by determination of somatic cells quantity at dairy and milk processing factories

The medicinal product for treatment and prevention of skin fungal infections

The portable station is to be used for search, localization, and rapid identification of radioactive and nuclear materials

Continuous contactless control of melt metal temperature in stream while tapping or pouring from metallurgical furnaces. Can be used for continuous temperature control of slab under mold, metal sheets, strips, and wires, as well as in chemical, refractory, glass, and other industries Contactless temperature control of cast iron while tapping from cupola furnace with a stationary mixer

AZOGRAN complex bacterial biopreparation can considerably raise seed germination power, stimulate sprouts formation, plant growth and development. It protects the plants from phytopathogens and some kinds of phytophages and raises the crop yield essentially

GAUPSIN complex biopreparation is used for protecting grain, industrial, vegetable, and fruit-and-berry crops from pests and disease agents in agriculture and forestry. It is applied to treat seeds and planting material and to spray plants after vegetation. It is also effective for treating crops before stowing

ECOVITAL consists of complementary nitrogen-fi xing rhizobium strains (Rhizobium or Bradyrhizobium or Sinorhizobium) and phosphate-mobilizing bacterium strain Bacillus megaterium. For each species of leguminous plants ECOVITAL is based on respective legume bacteria strains. The biopreparation has a positive soil fertility aftereffect

The offering is designed to grow structurally perfect diamond single crystals to be used in electronics, optics, précising processing, and in other industries Equipment for growing structurally perfect single crystal diamonds: 6-cylinder hydraulic press CSXII; load 6 × 48.5 MN, piston diameter 750 mm, weight 70 tons; dimensions 4 × 4 × 4,5 m

The system is designed for ensuring vibration and seismic stability of buildings and structures using special construction elements — rubber and rubber-and-metal blocks

Mechanical engineering, chemical industry, metallurgy, automobile and aircraft industries

The device is to be used for recording X-ray radiation with a high spatial resolution, in detectors for nondestructive control systems, medical tomography and radiography, as well as in intensifying screens in medical and industrial radiography

The double-axis scanning platform is designed for mounting antennas, radars, and other equipment, which require controlling the transmitting/receiving direction of RF signals

The receiver is designed for digitization and preliminary data processing of wideband analog signals with a high dynamic range in radars, communications, image processing, and in various scientific applications, particularly, in radio telescopes

The devices are designed for measuring micro- and macroscopic characteristics of clouds and precipitations

The means are to be used for protecting the natural water reservoirs from pollution and algae overgrowth, increasing the fishery productivity, and for ensuring the ecological safety

A basic magnetometer for geomagnetic observatories that meets new 1-second INTERMAGNET standard; can be used for fundamental geophysical research of Earth’s crust; a reference instrument for in-situ calibration of magnetometers without interruption of their operation

The pneumatic splints are to be used in military and emergency medicine for temporary immobilization of injured parts of human body in order to minimize traumatic effects and to enable patient transportation to medical station Pneumatic splint kits

The carbon-carbon implants are used in medicine for endo- and exo-prostheses

The indicator is designed for visual detection of unsymmetrical dimethylhydrazine (heptyl) leak as a result of through defects in detachable pipe connections of rocket fuel systems by a local change in color

The indicator is designed for visual detection of dinitrogen tetroxide (amyl) leak as a result of through defects in detachable pipe connections of rocket fuel systems by a local change in color

The technology is to be used for improving the technical condition of hoisting plant facilities in order to enhance their reliability and to increase hosting speed for escalating the quantity of minerals elevated to surface

The technology is to be used for prepress artwork setup for digital and offset color printing of illustrated books

The mixtures can be used in different soil and climatic zones in order to: increase the fertility of sandy soils; detoxify soils contaminated with heavy metals, radionuclides, and organic compounds; retain moisture in soils with various characteristics; provide soil ecosystem with self-healing capacity; adapt different species of plants to drought

Preparation of coal-water fuel to burn in power-generating boilers

Based on the chemical structure of organic compounds the expert system predicts their aqueous solubility, lipophilicity, and mutagenicity (the Ames test). The predicted values of these properties can be used as filter in medicinal chemistry to create new drugs and bioactive compounds. The system enables to replace expensive screening of these properties by computer experiment

Real-time measurements of micro- and macroscopic characteristics of clouds and precipitations, including simultaneous co- and cross polarization time-range profiles of reflected signal intensity, Doppler velocity, and Doppler spectra

IPMFlow software package is to be used for designing flow parts of steam, gas, and hydraulic power plants. It can be interesting for enterprises of power engineering, aviation gas turbine building, integrated gas refineries and transportation systems and so on

AVERCOM is biopreparation with insecticidal, acaricidal, and nematicidal contact action for plant protection against pests. It has shown plant protective, growthstimulating, adaptogenic, and anti-stress properties. AVERCOM is recommended for obtaining environmentally safe and organic products. There is an option of soil sanitation by treatment with AVERCOM

The boiler is to be used for heat and hot water supply to residential, industrial, and administra- tive facilities in closed heating systems

Theses signal generators produce UHF oscillations within Х-, Ku-, and Ka- frequency bands Compact Ka-band generator

The equipment is designed for the treatment and prevention of over 100 nosological groups of diseases and syndromes

Exploration of ores and oil deposits. Geophysical prospecting

The materials are to be used as inverse filters of protective walls of waterworks and drainage structures

Radar transmitters and plasma diagnostics 95 GHz W-band magnetron with a 1 kW power output

The КК-42 microprism set of compensators for strabismus and DSSC-1 set of diagnostic bars with microprisms are used for measuring the angle of strabismus and for diagnosing eye diseases. The prism-sphere-cylinder (PSC) eye glasses are designed for the treatment of strabismus

Early diagnostics of cancer and leukemia. Differential diagnostics of tumors. Immune status evaluation. AIDS monitoring. Monitoring of the therapy effectiveness

The equipment is to be used for briquetting fine raw materials and industrial waste

The multifunctional highly integrated RF modules are to be used in radars and communications operating within the 1…40 GHz frequency range

Radar and communication systems

The dressing is to be used in general and military surgery, combustiology to treat wounds and burns of various degrees of severity, including domestic accident burns, inflammatory complications, trophic ulcers, bedsores. It reliefs the traumatic edema, reduces the intensity of local and general inflammatory response, accelerates regenerative processes, and prevents the development of complications Carbon absorbent dressing

The preparation is used for preventing toxic liver damages (drugs, alcohol, etc.) and for treating immunodeficiencies of various origins, infectious diseases, diabetes, drug addiction, in the case of physical and mental stresses, nervous disorders, metabolic disorders, negative changes in cell processes upon exposure to ionizing radiation

Isathizone is used in medicine, for the treatment of human viral diseases: herpes viruses, herpes zoster and others and in veterinary medicine, for the treatment of diseases of animals and birds (Marek’s disease, avian infectious laryngotracheitis, bronchopneumonia in horses and calves, etc.)

The preparation for the treatment of sugar beet, wheat, corn, buckwheat, barley, millet, and rape seeds; used as a fungicide for fi ghting late blight decease of potato

The radar is designed to detect low-speed ground targets in the clutter environment; to detect UAVs with a low radar cross section (RCS) at low heights; to determine 2D coordinates (range, azimuth) of the targets, RCS, radial velocity, and Doppler spectrum moments

The technology is to be used in public utilities engineering for upgrading the facilities in order to increase their efficiency and to reduce natural gas consumption

Weather radars, etc

Continuous light-guide temperature control of metal melts in furnaces and melting facilities, in metallurgy; salt and ceramic melts, gaseous environments, and brickworks in other industries Temperature indicator

The automatic control system is designed to monitor the remaining thickness of crucible and hearth inwall and the skull formation. This enables a safe and long-term operation of blast furnaces

Portable workstation for complex radiation monitoring of foodstuffs, liquid and dry materials provides measurements in stationary and mobile conditions

The heat-technology is used to manufacture of instant hot meal

The devices are to be used in municipal power engineering system for raising efficiency of boilers due to recovery of exhaust gas heat for warming water for heat-supply systems Heat recovery plant with convection bank PK-1-102 sh installed behind TVG-4r boiler at the boiler house at 2a Osipovska St., Kyiv

The devices are designed to raise efficiency of glass furnace fuel due to recovery of exhaust gas heat for warming water for heat-supply systems

Periodical contactless measurements of temperature of solid bodies, liquids, and gaseous environments in metallurgy, chemical, refractory, and other industries

The thermometers are designed for contact measurements of temperature of solid bodies, liquids, and gaseous environments with the help of thermoelectric transducers; used in metallurgy, chemical, refractory, and other industries. For temperature control of metal melts the thermometers are complemented with thermoelectric changeable transducers TCT-P TPD-C portable contact thermometer TCT-P thermoelectric changeable transducer Industrial application of TPD-C portable contact thermometers

The test system is designed for diagnosing tuberculosis infection in animals at the level of herds, individual animals with latent tuberculosis or with tuberculin allergy, which are latent source of tuberculosis

This integral test system can be used for simultaneous quantification of fibrinogen, soluble fibrin, and d-dimer in human blood plasma in order to make comprehensive diagnosis of the hemostasis system, to detect or to prevent the thrombosis risk under various pathologies at the early stages of disease, to monitor antithrombotic and fibrinolytic therapy in cardiology, surgical and obstetric practice, combustiology, oncology, and endocrinology

The technology is proposed for acceleration of multiplication of pre-basic, basic, and certifi ed seeds and grain crops

Manufacture of steel wheels for rail transport

Production of dry functional food for infants with allergy to proteins of various origin

Wire rod for manufacture welding materials and metal products

The technology is designed to obtain low-sulfur and refined cast iron before its melting or cast iron products (ingots, pigs, castings)

The technology is to be used in access control systems of premises, computers, etc., in criminalistics, border control, and biometric identifi cation systems, as well as for the search of person’s images in databases and networks

The technology is to be used for implementing new resource-saving supports in the mine roadways while building different underground and surface facilities to radically improve stability, reliability, and safety of their structure and operation and to significantly cut the costs for their protection and maintenance Roof-bolting support scheme

The technology is designed for obtaining lecithin, a food additive (emulsifier, stabilizer) used in dairy, confectionery, and cosmetics industries, an additive for animal and fish feed. Purified phosphatidylcholine (a lecithin component) is phospholipid used as drug delivery system

The technology is to be used for raising the yield of oil-gas producing and injecting wells, which has lost their productivity as a result of long-term operation and have the following parameters: Well configuration: with uncased and cased bore; Diameter: from 114.3 mm and more; Depth: up to 5.5 km; Thickness of workable beds: 1.0—20.0 m and more

Instrument-making industry: detectors of ionizing radiation, X-ray tubes

The digital receiver performs analog to digital and digital to analog conversions, preprocessing of wideband signals. It can be used in radars, communications, electronic countermeasure and for high- resolution image acquisition and processing

Rapid thermoelectric, thermographic and thermodynamic analysis of С, Sі, Мn content and carbon equivalent in cast irons and steels; С and Si content in cast irons and steels; Si, Fe, Mg, Ni, Cu, Mn, Zn, Ti content in aluminum alloys; graphite form in cast irons

For ground-based and airborne radars