Levels of technology readiness

The sensor networks are designed to acquire data on the state of biological objects (plants, animals, and humans) from sets of sensors with wireless transmitters, which form a wireless network that can cover a large territory. It enables to quickly provide emergency medical aid to people injured in accident or ecological catastrophe who bear smart wireless sensors embedded in their clothes; also this can be used in smart agriculture to timely take measures for saving crops or protecting plants from influence of stress factors of natural or anthropogenic origin

The device is to be used for automatic integrated measurements of electric conductivity, thermopower, and thermal conductivity, as well as for determination of Q-factor of thermoelectric material samples in the temperature range from 30 to 900 °C. The design of measuring thermostat has been optimized for its use at a high temperature

The device is to be used for automatic integrated measurements of electric conductivity, thermopower, and thermal conductivity, as well as for determination of Q-factor of thermoelectric material samples in the temperature range from 30 to 500 °C. It can be used both for research and for industrial manufacture of thermoelectric materials

The device is proposed for using at laboratories of petroleum refineries to control fuel color according to ASTM international scale and international standards D1500, ISO 2049, GOST 20284 and others

The technology is used for energy efficient production of foodstuff storable at positive temperature without adding any chemical preservatives or stabilizers

The analyzer is designed to receive, to record, and to quantitatively analyze the infrared images of various objects in power engineering, construction, industry, medicine, defense industry, science, agriculture, ecology, etc. The analyzer external view

The kit can be used for scholarly research works and clinical studies for measuring the content of glucose in biological fluids

The device is designed to prevent drivers of motor vehicles and operators engaged in monotonous critical works from falling asleep that can lead to emergency and catastrophic situations

Lubrication of friction units of metallurgical equipment operating within the temperature range from –30 °C to +50 °C, under high loads and in corrosive environments

The complex is to be used for surface, subsurface and borehole measurements of methane and carbon dioxide concentration in the solid waste landfills (SWL); borehole measurements of engineering geophysical parameters and landfill cross section (clay insulating layers — wastes — natural ground)

The device is designed to measure energy distribution in cross sections of powerful laser radiation beams

The complex can be used in engineering and metallurgical industries, at labs and shops, specialized research institutes and universities for testing the cooling properties of different steel-tempering liquids; for development of more effective liquids in accordance with international standards; for contactless acoustic identification of cooling rate and mode in production environment

The DFS can be used for local simultaneous measurements of temperature and magnetic field in superconducting magnet systems at research laboratories and universities. The DFS can improve the accuracy of temperature measurement in the presence of magnetic fields using the adjustment method (if magnetic field and thermometer sensitivity to it are known)

Agriculture. The treatment of wheat seeds to improve yield and quality of agricultural products, accumulation of biological nitrogen in soil, improve the technology for crop cultivation involving biological components to raise plant productivity and functional activity of useful nitrogen-fi xing microorganisms

Agriculture. Used for the treatment of grain legume seeds to increase yield, to accumulate biological nitrogen in soil, and to improve technology for agricultural crops cultivation involving biological components

The device is used for sampling bottom water in the seas, rivers, and closed water reservoirs, as well as for sealing and degassing in order to study water-soluble gases and to carry out environmental studies

The device is used for drilling small holes in dry sandy soils; measuring temperature, thoron and radon content; sampling gases from holes; and for carrying out environment studies

The tool is designed for cutting semiconductor materials into legs. Cutting is made by diamond-coated wires. The wires are placed on a replaceable frame which serves as a cutting tool. The distance between the wires is set by replaceable dimension strips

The converter is to be used in high-precision AC instruments within the frequency range from 10 Hz to 100 MHz, in reference samples and standard AC instruments within a wide frequency range, and for the creation of calibration instruments

The device is to be used for application of functional coatings to elements of machines and mechanisms in machine-building, instrument engineering, textile, aviation, and chemical industries, optical engineering, and electronics

Dictionary of Ukrainian Language is designed to support the process of creating the dictionary of Ukrainian language by geographically distributed group of lexicographers in virtual mode. It is aimed at the linguists, lexicographers, philology students, etc.

This product is designed to supporting the process of creating the Ukrainian Dictionary of Welding Terminology by geographically distributed group of lexicographers and experts in virtual mode. It is aimed at the linguists and other professionals in the field of welding

Film forming aqueous polyurethane dispersions and polymer materials may be us as: protective immunostimulatory coating for seeds and plants in agriculture; antitranspirantes for reducing water scarcity and optimization of the production process of crops in drought conditions; binders for biologically active substances granulation

The generator is designed for supplying thermal and electric energy to habitable premises and amenity spaces, country houses, cottages, hangars, garages, trade kiosks, green houses, etc., as well as for charging accumulators, and for providing autonomous power supply to domestic equipment (radio receivers, TV sets, tape recorders) and mobile communication systems

The generator is designed for supplying DC power to radio receivers or other low-power electronic equipment, as well as for lighting living premises and utility rooms (buildings, country houses, warehouses, garages, trade kiosks, and pavilions)

The generator is designed for supplying DC to household radiolectronic equipment (radio receivers, tape recorders, etc.), small radio stations, as well as for charging various-purpose accumulators

The detectors are used for dosimetry and monitoring of X-ray and gamma radiation in nuclear energy, geology, ecology, medicine, and scholarly research

Trace element complexes for plant nutrition in commercial production and private gardens. They are used for preplant seed treatment and nutrition of growing plants in order to increase crop productivity and resistance to adverse environment factors

The device is designed to produce high-purity hydrogen and oxygen by the water electrolysis method. The electrolyzer can be used in power engineering, chemical, metallurgical, and food industries, etc.

The electromechanical systems based on doubly-fed electric machine are designed for wind turbines and adjustable electric-drive systems

This nutrient medium is used for direct regeneration of in vitro rhizogenesis of Crataegus L. genus plants and provides wide opportunities to preserve the plant's gene pool. It enables the creation of original breeding material and rapid propagation of plants in ornamental horticulture, fruit growing, and breeding

This nutrient medium is used to increase the explant regeneration capacity and propagation rate of C. chinensis. It provides opportunities to preserve the plant gene pool and to obtain morphologically and genetically uniform planting material of this variety on the commercial basis for plant introduction and ornamental horticulture

The means are to be used for protecting the natural water reservoirs from pollution and algae overgrowth, increasing the fishery productivity, and for ensuring the ecological safety

Multilayer insulation tape for oil- and gas pipelines applied under base or field conditions

The panel is designed for personalized monitoring of tumor, adjustment of treatment regimens and improvement of the life quality of cancer patients Algorithm for personalized cancer monitoring

Dictionaries of Ukraine electronic edition is designed to provide users with lexicographical information about Ukrainian language and is useful for linguists, lexicographers, philology students as a tool to support their linguistic researches, as well as for ordinary users: school and university students and all those interested in Ukrainian

This LED lighting system has a controllable spectral composition and light intensity and optical parameters of artificial light adaptable to the natural light

The computer is to be used for mathematical modeling in mechanical engineering, civil engineering, defense industry, etc.

The hydrophobic flexible intraocular lenses are used for implantation as substitutes for the eye lens

The POSHUK information retrieval system is designed for object-oriented search on the Internet

The calorimeter can be used in laboratories and quality control centers of fuel plants using fossil fuels, thermal power plants, power plants, and industrial boilers. It is designed for measuring combustion heat of various types of fossil fuels. The calorimeter meets the requirements of DSTU and ISO 1928

The technology is designed to reinforce parts of machines and mechanists in turbine- and machine-building industries Ion-plasma equipment for surficial reinforcement

The technology is to be used for oil well control and suspension under normal and abnormal conditions of operation and repair works

The set of materials is to be used for repairing penetration and surface damages of pipe insulation

This lexicographical system is designed for creating text corpuses in Ukrainian and for studying language phenomena and cognitive-communicative structures. It is aimed at the linguists, lexicographers, philology students, and those who studies linguistic phenomena

The bandage is used for treatment of wounds, burns, and skin diseases protecting them from mechanical stress and infections, cooling, anaesthetizing, disinfecting, creating and maintaining a wet environment, infusing pharmacological agents, and absorbing wound discharge General view of medical bandage

The tool is designed for cutting semiconductor materials, glass, quartz, graphite, lead, tin, and other materials into square and rectangular blanks

The grease is an effective antifriction agent to be used for lubricating the friction units operating in wet and corrosive environments at a high temperature and pressure at brick, glass, ceramic, and cement factories and plants Canning of ready-to-use grease lubricant Final treatment of grease lubricant

The grease is a special lubricant to be used for the friction units with rolling elements bearings of locomotives, diesel trains, and multiple-unit trains

The equipment and technologies are designed to prepare and to pour ferrous and nonferrous alloys into molds, die casting machines, and continuous casting molds, to cast under electromagnetic pressure, to obtain metal suspensions for aluminum alloy rheocasting technologies, and to prepare “copper-chromium cast iron” alloys with the “frozen emulsion” structure

The inverters are to be used for transmitting energy from solar photoelectric systems and electric energy storage systems to external power grids. They provide integrating with power-generating equipment of renewable power engineering facilities and interacting with end users; maintaining the power load curve and power supply in the case of interruptions; improving the reliability of electric power and energy system operation; accumulating electric power in the period of its low cost and supplying in the period of its high cost 500 kW inverter

It can be used in medicine (radiation therapy), research equipment based on accelerators and synchrotrons, mass spectrometry, X-ray diffraction, and so on

The modules are designed for creating thermoelectric generators used as low- temperature stage of heat engines, combustion engines, diesel engines, gas turbines, etc. using the exhaust heat, as well as for creating heat and electricity generators with catalytic flameless combustion of gaseous or liquid fuel

The system is to be used for bottom water sampling, sealing, degassing, bottom sediment sampling, and for temperature measurement at multiple levels of bottom sediments

The method is to be used for monitoring the fire-dangerous areas of peatlands to prevent fire outbreaks and for detecting hidden residual hot spots and fire seats after fire-fighting operations

The system is designed for early detection of ischemia, diagnosis of coronary artery disease, stratification of arrhythmia risk and prolonged QT syndrome, diagnosis of coronary arteries diseases, evaluation of the treatment effectiveness, and testing of drugs on proarrythmic effect

Nozzles and cutting-tool cartridges for mechanical engineering, chemical and petrochemical industries; medical implant blanks

The technology and equipment are designed for welding butt joints of titan and titan-based alloys (the thickness of elements welded ranges from 20 to 110 mm)

The equipment is designed for ultrasonic impact treatment (UIT) of welded joints in responsible constructions, metallic surfaces of cast products, as well as for various machine-building products for their strengthening, redistribution of residual stress, reduction of stress concentrators, reduction of surface roughness and improvement of corrosion resistance during operation and maintenance

The equipment is designed for ultrasonic finishing treatment (USFT) of high-strength and quenched components to reduce their roughness and to increase their wear resistance and fatigue strength

The device is to be used for detecting the presence of gas in the environment and the gas leaks in the pipelines, for assessing the pollution of hollow structures compartments with volatile gases (ammonia, amyl, heptyl etc.), and localizing the gas leaks at the structure joints

The reactor is to be used in alternative power engineering for producing photovoltaic cells

The device is designed for precision processing of micro- and nanoelectronics, UHF and computing appliances

The product is a multifunctional additive to transmission and industrial oils, greases, and refrigerating lubricants for improvement of tribological and antioxidant properties

Active multifunctional additive to anti-friction greases, motor oils, and refrigerating lubricants for rolling or sliding bearings and other friction nodes operating under high temperature and corrosive environment

The device is proposed for measuring the research and the motor octane numbers and evaporation temperature of clear gasoline at oil refineries, gas filling stations, and for individual use

The complex is designed for the use in civilian and military medicine, disaster medicine, sports and labor medicine for the combined diagnosis of myocardium and vegetative nervous system, vascular and noninvasive measurements of hemoglobin

The device is to be used for studying electro-physical characteristics of weak-conductive liquid solutions with a specific resistance of up to 1012–1013 Ohm · cm and materials with a low dielectric constant (gasoline, benzanol mixtures, oils, etc.) at liquor and spirits factories, motor gasoline plants, and in sanitary control services

The device is to be used for rapid analysis of biochemical composition of aqueous solutions and for identification of chemical substances, including the toxic ones, for the purposes of environmental monitoring, food products quality control, and medical diagnostics

The device is designed for obtaining semiconductor and scintillation crystals for ionizing radiation detectors

The device is used to synthesize microelectronic and optoelectronic materials

The unit is designed for the deep purification of enriched isotopes 106Cd, 116Cd, 64Zn, 128Te, 130Te, and others and for the creation of low-background scintillation crystals based on them to study the properties of neutrinos and the weak interaction and to search for effects beyond the standard model of elementary particles

The prediction is used to identify the dangerous areas in coal beds and exhausted mines and the zones suitable for coal bed methane degassing

The method is to be used for identifying and forecasting landslide-prone areas to prevent activation of landslides within urban areas and areas exposed to anthropogenic load, which leads to significant environmental problems and financial losses

The sensor is used for remote control of track occupancy and railway car speed on hump yards in complicated weather conditions and for protection of railway crossings to reduce the risk of accidents

The MEDICEL products are wound dressings for the treatment of skin injuries and burns in both field and clinical conditions. The dressings provide a repair of damaged tissue, anti-inflammatory, hemostatic, anesthetic actions, and transdermal delivery of drugs

The generators are to be used for reducing natural gas consumption for heating purposes in rural regions due to the use of agricultural product waste as fuel

The cultivar can be used in food industry as an alternative to traditional vegetable counterparts and in pharmaceutical industry and dietology as natural source of inulin, vitamins and other important bioactive compounds healing the human bod

This cultivar can be used for food industry both fresh (in salads) and processed (canned, salted, pickled, jams, jellies, etc.)

The Sovskyi lettuce cultivar (Lactuca sativa var. romana Lam.) can be used in food industry and dietology, both fresh and processed

The heat-technology is used to manufacture of instant hot meal

The thermoelectric generator is designed for converting waste heat from industrial facilities and heat engines (internal combustion engines, gas turbines, etc.) into electric energy. It is an additional source of energy that can be used both for internal needs and for generation into external electric power systems

The thermoelectric generator is designed for supplying electric energy to natural gas metering complexes, telemetering equipment, and automatic safety controls of gas distributing stations

The thermoelectric generator is designed for power supply to electric devices of autonomous gas-fired heating sources (tanks, boilers)

The converter is designed to determine energy of single and infrequent electric pulses with a duration of 10–7—10–1 s and energy value of 1· 10–6—4· 10–3 J

The device is designed for warming up the engine and heating the passenger compartment at low ambient temperature due to a direct conversion of thermal energy of diesel fuel combustion to electric power. The generated thermal energy is used to warmup the engine and to heat the car passenger compartment, whereas the electric power goes for power supply to heater components and battery recharge

Designed to measure direct solar irradiance with the highest accuracy using the absolute method. It can be used for measuring the solar constant both ground based and in space conditions (as part of meteorological satellites or space stations) and as a metrological means for ensuring the accuracy of measurements of short- and long-wave parts of the solar spectrum, scattered solar radiation, etc.

The device is designed for power supply to electronic circuits of guided munitions (artillery and aviation projectiles, bombs, and rockets) on the flight path

The modules are designed for cooling and thermal stabilization of CCD arrays used in attitude control systems of low-orbit and geostationary satellites

The devices are to be used for converting arbitrary shaped AC signals in wide frequency range (from fractions of hertz to several hundred megahertz) to DC thermopower functionally related to effective value of converted signal

The device is to be used for analysis of rocks in deep well drilling. It can be used on interplanetary stations to determine the elemental composition of soil of the Solar System planets, as well

The primer is designed to increase the effectiveness of pipe corrosion protection; it can be used as a surface modifier for pipes that have remains of old coating in the case of re-insulation of active pipeline with polymeric bitumen coatings

The technologies are proposed for obtaining high yields of cereal crops by agroholdings

The technology is used for production of figurine-shaped articles for mine and oil industry, machine-building industry, chemical industry, metallurgical industry, power engineering, orthopedics (hip joints), and dentistry (implants and prosthesis)

This technology is used to produce composite oxide powders for photocatalytic purification of air and water

Production of dry functional food for infants with allergy to proteins of various origin

The technology is to be used for recovering industrial water supply wells up to 200 m depth, the debit of which has decreased as a result of long-term use

The technology is proposed for reducing the production costs and improving the physical, chemical, and environmental characteristics of fuel products

The technology is proposed for pasteurization and preservation of foodstuffs by the picowave radiation technology without any chemical substances to prevent spoilage while stored and to protect the consumers against infectious diseases

This technology is designed to enhance water repellency, corrosion resistance, and durability of concrete structures and products made of asbestos concrete and other organic and mineral concrete systems used in extreme operating conditions

The device is designed for transportation of blood and plasma, serum and drugs, organs, bacteria and virus cultures between laboratories; transportation and preservation of vaccines; preheating of ampoules to 36 °С prior to vein injections. The device design meets the requirements for medical equipment including its disinfection. The power is fed from onboard network of the vehicle

The air conditioner is designed to ensure comfortable climate conditions (air conditioning) in various-purpose vehicles. Due to the absence of movable parts and freon-containing cooling agents, these air conditioners are indispensable components in the manufacture of environment friendly air conditioning systems

The equipment is to be used in technological processes for welding of plastics both in manual and automatic modes, in various industries Equipment for ultrasonic point welding of plastics USG with a flat concentrator for welding longitudinal joints

The plant is designed for wastewater treatment in order to get the quality suitable for its use for drinking and for various technical purposes

The plant is designed for obtaining fine filler or filter powder from volcanic ash (perlite) of various deposits

The innovative equipment is to be used for construction, reconstruction, and repair of plastic pipelines, including vacuum sanitary ones

To switch signals in microwave devices